"SWEDISH BATTERY INNOVATIONS"
Lilla Bommen 6
Gothenburg
411 04
Sweden

VISMAR PREMIUM 60Ah (L)-(1)

SWEDISH BATTERY INNOVATIONS
VISMAR PREMIUM 60Ah (L)-(1)
Description

Starter battery VISMAR PREMIUM 60Ah (L)-(1) lead-acid type is characterized by high starting currents. The battery is equipped with plates increased resistance to corrosion, it has additional reserve capacity, high rate of HCI, allows for deep discharge, is highly resistant to temperature changes.

 
Specifications
  • - Voltage: 12 V
  • - Capacity С20: 60 Ah
  • - Dry run current: 540 A
  • - Weight incl. the electrolyte 15.2 kg
  • - Water loss: low L
  • - Overall dimensions: 242х175х190 (+/- 1,5 mm)
  • - Case colour: black
  • - Electrolyte density (aqueous sulphuric acid solution) 1,27-1,30 g/sm3 (при + 25°С), top grade sulphuric acid and distilled water are used at the same time
The charge level, % The degree of discharge, % Open circuit voltage, V The density of the electrolyte, g/cm3
100 0 12,7 1,28
80 20 12,5 1,24
60 40 12,3 1,21
40 60 12,1 1,175
Polarity / Terminal

Manufacturing technology

In the production of the most modern battery technology:

  • - casting shunts,
  • - alloying shunts,
  • - the strengthening of the active mass of synthetic fibers,
  • - protection against low temperatures, organic extenders Manufacture is equipped with technological equipment of leading companies:
    • - USA: WIRTS, MAC, Oxmaster
    • - Italy: SOVEMA, Moran, Symec, CATELLI
    • - Austria: Elbak
    • - England: TBS
    • - Germany: Digatron
    • - Turkey: BATEK
Quality Policy

The study of consumer demand, strict observance of production standards, compliance procedures, processes, introduction of modern methods of quality control - allows you to eventually offer the consumer a product of the highest quality.

The quality complies with the following regulations:

  • - The European standard EN 60095-1
  • - The international standard ISO 9001-2008, ISO 16949-2009
Operating instructions

battery can be used:

  • - in the climatic conditions of the form UHL category 2 from -40 °C to + 60 °C,
  • - with a relative humidity of 95%,
  • - at a height of not more than 4300 m asl,
  • - vibration loads less than the acceleration of 14.7 m/s 2 ,
  • - limit electrolyte temperature 50°C
Guarantee

36 months from date of manufacture.